RØDELink represents the next generation of digital wireless systems. Using a Series II 2.4GHz digital transmission with 128-bit encryption, it is able to constantly monitor and hop between frequencies to maintain the strongest possible signal level at a range of up to 100 metres* (over 100 yards). The RØDELink Filmmaker Kit provides everything you need to start shooting video wirelessly, including a receiver, transmitter and broadcast-grade lavalier microphone. The receiver (RX-CAM) features an OLED display with information on level, battery status (receiver and transmitter), mute and channel selection. The unit can be mounted on a standard camera shoe mount, 3/8″ thread or belt-clip, and for added versatility the shoe mount can be located in one of two positions. The lightweight transmitter (TX-BELT) can be fitted to a belt or clothing and features a locking thread to ensure the microphone connection is as secure as possible. RØDE has included an omnidirectional lavalier microphone in the kit to provide the highest possible audio reproduction quality. * range estimations based on optimal environment Visit the RØDELink feature page RØDELink Filmmaker Kit Specifications Transmission type 2.4GHz Fixed Frequency Agile System System dynamic range 112dB Range (distance) Up To 100m Frequency range 35Hz – 22kHz Maximum output level 1v Rms (2.8v P-p) Max input signal level 1v Rms (2.8v P-p) Max latency 4ms Receiver (RX-CAM) Power source 2 X AA Battery Or MicroUSB Antenna Internal Output connection 3.5mm TRS Locking Jack Socket – Dual Mono Output impedance 300Ω Dimensions 111mm X 65mm X 52mm Weight 190gm Transmitter (TX-BELT) Power source 2 X AA Battery Or MicroUSB Antenna Internal Input connection 3.5mm TRS Locking Jack Socket Input impedance 10kΩ Dimensions 111mm X 65mm X 40mm Weight 190gm RØDELink LAV ACOUSTIC & ELECTRICAL SPECIFICATION Acoustic Principle Permanently Polarised Condenser Polar Pattern Omni-directional Output Impedance 3k Ω Typical Frequency Range 20Hz – 20kHz Maximum SPL 110 dB SPL (@ 1kHz, 1% THD into 1Ω load) Sensitivity -33.5db re 1 Volt/Pascal (21.00mV @ 94 dB SPL) /- 2dB @ 1kHz Signal to noise Ratio 67 dB Equivalent Noise (A-weighted) 27 dB Typical Dynamic Range 83 dB Typical MECHANICAL SPECIFICATION Dimensions 1200.00mmH x 4.50mmW x 4.50mmD
